你的位置:首页 > 网海拾贝

LSI 9210-8i HBA Card Flash To IT Mode

2017-04-20 浏览:(1358) 网海拾贝 评论(0)

If you are using LSI SAS 2008 based HBA/RAID cards such as the LSI 9211-8i FreeNAS recommend run in IT (Initiator Target) mode. Don’t use cards in IR (Integrated RAID) mode.

For update  firmware and BIOS check current firmware version with command:

sas2flash -list

Example output:

(in my case card already in IT mode)

Firmware should be at-least 20.00.07.00 and BIOS should be 7.39.02.00

Download Firmware and BIOS

Firmware and bios download here: https://docs.broadcom.com/docs-and-downloads/host-bus-adapters/host-bus-adapters-common-files/sas_sata_6g_p20/9210-8i_Package_P20_IR_IT_FW_BIOS_for_MSDOS_Windows.zip

Then download flasher for UEFI: https://docs.broadcom.com/docs-and-downloads/host-bus-adapters/host-bus-adapters-common-files/sas_sata_6g_p20/Installer_P20_for_UEFI.zip

You need sas2flash.efi from Installer_P20_for_UEFI.zip and 2108it.bin aswell as mpt2sas.rom from 9210-8i_Package_P20_IR_IT_FW_BIOS_for_MSDOS_Windows.zip

Create bootable USB stick. Use Rufus software.

Put those 3 files on a fat32 USB stick load into UEFI Shell get to the folder with the 3 files and run:

sas2flash.efi -f 2108it.bin -b mptsas2.rom

Then run:

sas2flash.efi -list

And confirm that firmware is 20.00.07.00 and BIOS is 7.39.02.00

In case if you have more than 1 RAID card for example 2, you can update BIOS and firmware simultaneously:

sas2flash -listall

Output:

then:

sas2flash.efi -c 0 -f 2108it.bin -b mptsas2.rom
sas2flash.efi -c 1 -f 2108it.bin -b mptsas2.rom

-c specifies which card you want to target

文章来源:https://arstech.net/lsi-9210-8i-hba-card-flash-to-it-mode/

  • 发表评论
  • 查看评论
【暂无评论!】

发表评论:

◎欢迎参与讨论,请在这里发表您的看法、交流您的观点。